Ceramir Laser Sintered Hybrid Glass CAD CAM Blocks.
12 x 14 x 18mm.
Ceramir CAD CAM C-Blocks are Chromatic blocks, which correspond to VITA shades A0, A1, A2 & A3.
Ceramir CAD/CAM BLOCKS are a new type of CAD/CAM material.
They are manufactured using advanced patented laser sintering technology, creating a single glass phase material embedded in a hybrid matrix.
This results in that Ceramir CAD/CAM BLOCKS have the strength of particle infiltrated ceramics (lithium disilicate), the aesthetics comparable of feldspathic glass-ceramics, but without the brittleness of pure ceramics, and with the flexibility similar to dentin (20 GPa), which reduces tension during masticatory load and creates a shock-absorbing effect, decreasing occlusal stress.
Ceramir CAD/CAM BLOCKS have a natural translucency due to their homogeneous glass-like structure.
They reflect light and, after a short polishing, have a high gloss surface that resembles natural teeth.
Ceramir CAD / CAM BLOCKS offer a unique combination of strength, flexibility and aesthetics and can be used for a wide range of indications, including crowns, inlays, onlays and veneers.
The advantage with Ceramir CAD/CAM BLOCKs is that it can be milled to very thin margins while maintaining a high edge stability.
A full crown will need a thickness of 1.5 mm in areas with cusps and occlusal contacts, whilst veneers can be milled down to as little as 0.3 – 0.5 mm with remained smooth edge providing as little gap formation as possible.
Due to the composition of the material, restorations made with Ceramir CAD/CAM BLOCKS can be easily repaired with composite in the mouth, if necessary.
Pack of 5.
